
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X130-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 130mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
By turning the integrated stopper screw, you can trim the 130mm nominal stroke back by up to 30mm, creating a precise 100-130mm usable travel window for exact end-position tuning during commissioning.
This bore features a robust 25mm carbon steel piston rod with an M20x1.5 thread, paired with a G1/2 PT port for high airflow. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to easily add CMSE or DMSE switches later if positioning feedback becomes necessary.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X130-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 100-130mm travel window on the fly to handle slightly different package sizes on the same packaging line without changing tooling.
Fine-tune the retraction end-stop during initial commissioning to achieve exact clamping or pressing positions without adding external shims.
Use the 30mm adjustment range to account for mechanical wear or slight material thickness variations over the machine's lifecycle.
The adjustable stroke is selected over a fixed SAI cylinder when you need variable end-stops to accommodate product changeovers without physically swapping the actuator. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, CR).
Because the rear screw acts purely as a mechanical travel stop and the air cushions only manage deceleration, this cylinder will not hold a load without live air pressure. For dead-air load holding, consider an external rod lock, a pilot-operated check valve, or the related SAIL and BSAI locking cylinders. As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 cylinders without requiring custom brackets.
Quick checklist
At its maximum 1.0 MPa pressure, it can deliver up to 801 kgf.
The rear adjuster acts as a mechanical stop, allowing you to shorten the 130mm nominal stroke by up to 30mm. This creates a usable travel window of 100-130mm, which can be fine-tuned during setup without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.