
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X130-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 130mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
It features a 25mm carbon steel piston rod and a G1/2 PT port. By integrating an external stopper, this actuator allows you to fine-tune the retract position on the fly, creating a usable travel window of 55 to 130mm for this specific SKU.
The adjuster functions purely as a travel stop to set deceleration and end-points, meaning it cannot hold a load without live air pressure. For load-holding requirements, an external rod lock or related types like SAIL or BSAI are necessary. This extruded aluminum barrel design includes sensor grooves on both sides, and adding a magnet enables precise position detection using AirTAC CMSE reed or DMSE electronic switches.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X130-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the retract distance from 55 to 130mm instantly when switching between product sizes on a packaging line, avoiding the need to physically swap cylinders or add shims.
Fine-tune the final resting position of heavy 100mm bore tooling at machine setup, using the rear stopper to perfect alignment under a 3927N load.
Adjust the bottom-out position for pressing or forming applications on the fly, accommodating different material thicknesses without reprogramming the pneumatic valves.
If your setup needs less force, stepping down to an 80mm bore provides 2513N; if you need more push, a 125mm bore yields 6136N. Unlike a fixed-stroke SAI cylinder, the SAIJ100X130-75 lets you dial in the exact retract distance without swapping hardware.
When matching this for an ISO 15552 replacement, verify the 130mm stroke, 75mm adjustment range, G1/2 port, and mounting style. SAIJ supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, deliberately omitting FB, CA, CB, and CR. Because this unit lacks the -S magnet option, it will not support CMSE or DMSE sensors out of the box. Furthermore, the 25mm rod handles high side loads well, but any stroke approaching 300mm or beyond still requires an external guide to prevent barrel wear.
Quick checklist
The rear adjuster acts as a mechanical stop that shortens the effective travel. For this model, you can trim the 130mm nominal stroke back by up to 75mm, giving an adjustable operating window of 55 to 130mm. Note that this stopper only sets the end position and does not lock the load without continuous air pressure.
If you increase the pressure to 0.7 MPa, the push force rises to 5497N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.