
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X135-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 135mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
It features a 25mm carbon steel piston rod and G1/2 PT ports. The integrated rear stopper allows you to trim the nominal 135mm stroke back by up to 10mm, creating a precise 125-135mm usable travel window for exact end-position tuning.
This adjustable travel range is set via a mechanical screw rather than a locking mechanism, meaning the cylinder still requires live air to hold its load. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to add CMSE reed or DMSE electronic switches if position feedback is needed later. It supports a reduced set of ISO 15552 mounting options—Basic, FA, LB, TC, FTC, TCM1, and TCM2—omitting FB, CA, CB, and CR.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X135-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 135 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×135 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 125-135mm travel window during format changes on a packaging line, allowing quick adaptation to slightly different carton sizes without changing the cylinder.
Fine-tune the retracted position of a large press or clamping fixture at commissioning, using the 10mm rear adjuster to perfect the mechanical stop without external shims.
The SAIJ100X135-10 is selected over a fixed-stroke SAI when a machine requires variable end-stops to accommodate minor product size changes without physically swapping cylinders or adding external stops. Since the stroke is under 300mm, side-load stress on the 25mm rod is manageable, though an external guide remains best practice for heavy lateral loads. To hold a load securely without continuous air pressure, you must integrate an external rod lock or select an AirTAC SAIL or BSAI cylinder, as the SAIJ adjuster functions only as a travel stop. For a direct ISO 15552 replacement match, verify the 100mm bore, 135mm stroke, 10mm adjustment, G1/2 PT ports, and your required mounting kit.
Quick checklist
The rear adjuster acts as a mechanical stop that lets you shorten the nominal 135mm stroke by up to 10mm, resulting in a 125-135mm usable travel window. It is a travel stop and does not lock the load without live air pressure.
It operates at speeds between 30 and 800 mm/s.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.