verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ100 Adjustable Cylinder SAIJ100X135-100

The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X135-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 135mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke135 mm
  • Port sizeG1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$185.72 $201.95Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ100 stroke, mounting and version on one page All SAIJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X135-100

The AirTAC SAIJ100X135-100 is a double-acting ISO 15552 profile cylinder equipped with a rear mechanical adjuster. The integrated rear stopper allows you to dial back the nominal 135mm stroke by up to 100mm, creating a highly flexible 35-135mm usable travel window for rapid product changeovers.

This adjustable-stroke design eliminates the need to swap cylinders or bolt on external stops during commissioning. The extruded aluminum barrel includes sensor grooves on both sides, and the standard carbon steel rod handles robust loads. It carries a G1/2 port and operates at speeds between 30-800mm/s. The rear adjuster functions strictly as a travel stop to set the end position, not as a lock to hold the load without live air pressure.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X135-100 Technical Specifications

ModelAirtac SAIJ100 Adjustable Cylinder SAIJ100X135-100
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke135 mm
Acting typeDouble acting
Port sizeG1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X135-100

SAIISO 15552 profile-barrel cylinder series.
100Bore size in mm.
×135Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X135-100 Is Used

tune

Variable End-Stop Positioning

Dial in the exact retraction point between 35mm and 135mm during machine setup to accommodate different material thicknesses without changing hardware.

factory

Product Size Changeovers

Quickly adapt a production line to new packaging dimensions by turning the rear adjuster, reducing downtime between product runs.

precision_manufacturing

Commissioning Fine-Tuning

Trim the effective stroke on-site to perfect the mechanical timing of a new assembly without machining custom spacers.

Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X135-100 the Right Cylinder?

If your setup only needs fixed travel, a standard SAI cylinder is simpler, but the SAIJ100X135-100 shines in machines running multiple product sizes. For lighter duties requiring less than 1000N at 0.5MPa, stepping down to a 50mm bore saves space and air consumption. Because the 135mm stroke is relatively short, side-loading is less of a concern, but always ensure the M20x1.5 rod thread is properly aligned. To replace an ISO 15552 cylinder, match the 100mm bore, 135mm stroke, PT G1/2 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Since no magnet is specified, position sensing via CMSE or DMSE switches is not enabled.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X135-100 FAQ

At 0.7MPa, the push force increases to 5497N.

The rear adjuster acts as a mechanical stop, allowing you to shorten the 135mm nominal stroke by up to 100mm. This creates a usable travel window of 35-135mm. It sets the end position but does not lock the load without continuous air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X135-100

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ100X135-100 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.