
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X135-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 135mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
It features a 25mm carbon steel piston rod and a G1/2 PT port. By integrating an external stopper screw, this model allows you to fine-tune the retract end position without swapping out the entire unit.
With a 135mm nominal stroke and a 40mm adjustment code, the usable travel window spans 95-135mm. This built-in adjustability is ideal for product-size changeovers on a line. The extruded aluminum barrel includes sensor grooves on both sides, ready to accept CMSE reed or DMSE electronic switches if a magnet is specified later.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X135-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 135 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×135 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 95-135mm travel window during format changes on a packaging line, avoiding the need to physically swap cylinders for different package sizes.
Fine-tune the retract stop at machine commissioning to dial out mechanical play or align a heavy 100mm bore tooling plate perfectly.
Vary the ejection stroke on an assembly press to accommodate parts of different heights without reprogramming the PLC timing.
The adjustable stroke is selected over a fixed SAI cylinder when you need variable end-stops for machine setup or product changeovers. To match this ISO 15552 interchangeable unit, confirm the 100mm bore, 135mm stroke, 40mm adjustment, G1/2 port, and standard carbon rod. Since the stroke is under 300mm, side-load stress is minimal, but external guides are still recommended for heavy lateral loads.
Remember that the rear adjuster functions strictly as a travel stop, not a lock. The cylinder cannot hold a load without live air pressure; for dead-air load holding, consider an AirTAC SAIL pneumatic lock, BSAI clamp-lock cylinder, or an external pilot-operated check valve.
Quick checklist
The rear adjuster acts as an external stopper screw that lets you trim the effective travel back by up to 40mm. This creates a usable stroke window of 95-135mm, allowing you to set the precise retract end-position during commissioning without changing the cylinder.
If you increase the pressure to 0.7 MPa, the push force rises to 5497N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.