
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X135-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 135mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X135-75 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster.
This 100mm bore unit uses a G1/2 PT port and a robust 25mm carbon steel rod with an M20x1.5 thread to handle demanding side loads. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to add CMSE reed or DMSE electronic switches if position feedback is later required.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X135-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 135 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×135 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly adapt machinery for varying package sizes by shifting the retract stop within the 60-135mm window, eliminating the need to swap out entire cylinders.
Fine-tune the final retract position during machine commissioning to achieve precise alignment, using the rear screw rather than adding bulky external stoppers.
Choose this adjustable model over a fixed SAI cylinder when your application requires frequent product changeovers or precise end-position tuning without machining external stops. For load-holding without live air pressure, note that the rear adjuster functions only as a travel stop; you would need an SAIL or BSAI cylinder instead.
When replacing an ISO 15552 cylinder, match the 100mm bore, 135mm nominal stroke, 75mm adjustment range, G1/2 port, and mounting choice from the SAIJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the 135mm stroke is relatively short, side-load stress is minimal, but always guide the load for optimal rod bearing life.
Quick checklist
The rear adjuster acts as a mechanical stop that shortens the effective stroke. For this model, the 135mm nominal stroke can be trimmed back by up to 75mm, resulting in a usable travel window of 60 to 135mm.
If operated at 0.7 MPa, the push force increases to 5497N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.