
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X140-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 140mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
It features a 25mm carbon steel piston rod and a G1/2 PT tapered port. By integrating an external adjusting screw at the rear, this model allows you to shorten the effective travel from its 140mm nominal stroke down to 40mm, creating a highly flexible 40-140mm usable window.
This wide adjustment range is ideal for product changeovers on automated lines, letting you fine-tune end positions at commissioning without swapping the cylinder or adding external stops. The extruded aluminum barrel includes sensor grooves on both sides for mounting CMSE reed or DMSE electronic sensors. Remember that the rear adjuster acts purely as a travel stop for deceleration alongside the standard air cushions, not as a lock to hold loads without live air pressure.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X140-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 140 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×140 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retraction point between 40mm and 140mm during machine setup to accommodate different material lengths without mechanical rebuilds.
Quickly adapt forming or clamping stations on a production line by rotating the rear adjuster, saving downtime when switching between product variants.
Trim the stroke precisely during initial commissioning to prevent mechanical crashes, relying on the rear stopper rather than adding external bumpers.
The SAIJ100X140-100 is selected over a fixed-stroke SAI when a machine handles multiple product sizes, as the 100mm adjustment screw allows rapid adaptation of the end-stop. For load-holding without continuous air pressure, this cylinder is insufficient; you should specify an SAIL (air-released lock) or BSAI (clamp-lock) instead. When matching ISO 15552 replacements, confirm the 100mm bore, 140mm stroke, 100mm adjustment, G1/2 port, PT thread, and the absence of a magnet (-S). Because the stroke is under 300mm, side-load risks are moderate, but the 25mm rod still requires external guiding for heavy lateral loads.
Quick checklist
If pressure is increased to 0.7MPa, the push force rises to 5497N.
The rear adjuster acts as a mechanical stop that limits the retraction travel. For this SAIJ100X140-100 model, you can trim the 140mm nominal stroke back by up to 100mm, resulting in a usable travel window of 40-140mm. It functions as a stop, not a lock, and requires live air to hold position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.