
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X140-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 140mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
By integrating a 20mm adjustment screw, this unit allows you to dial back the 140mm nominal stroke, creating a precise 120-140mm usable travel window for exact end-position tuning. The extruded aluminum barrel features sensor grooves on both sides, allowing you to easily add CMSE or DMSE electronic switches if position feedback is later required.
This model uses a robust 25mm carbon steel piston rod with an M20x1.5 thread, paired with G1/2 PT ports for high airflow. The rear adjuster acts purely as a mechanical stop to fine-tune the retract distance during commissioning; it is not a locking device and will not hold a load without live air pressure. For applications requiring secure load-holding, consider the SAIL or BSAI series instead.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X140-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 140 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×140 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly dial in the 120-140mm stroke window during line format changes without swapping out the entire actuator.
Fine-tune the retract position during machine commissioning to prevent crashes and ensure precise mechanical seating.
Choose this 100mm bore cylinder when your application requires heavy thrust up to 3927N at 0.5 MPa (or 7068N at 0.9 MPa), stepping up from a 80mm bore that provides 2513N. The adjustable-stroke design is ideal for machine setups requiring variable end-stops or product changeovers, eliminating the need to physically swap cylinders or bolt on external stops. If you need a fixed travel distance without field adjustment, the standard SAI series is a simpler alternative.
When replacing an ISO 15552 cylinder, match the 100mm bore, 140mm stroke, 20mm adjustment range, G1/2 PT port, and your required mounting style. SAIJ supports a specific subset of mounts: Basic, FA, LB, TC, FTC, TCM1, and TCM2. Because this unit lacks a magnet (-S), it will not trigger reed or solid-state sensors out of the box.
Quick checklist
The SAIJ100X140-20 features a 20mm rear adjuster screw that mechanically stops the piston early. This creates a usable travel window of 120-140mm, allowing you to trim the retract stroke without adding external stops.
At 0.9 MPa, the push force increases to 7068N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.