
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X140-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 140mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X140-30 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. By turning the rear screw, you unlock a usable travel window of 110-140 mm, enabling precise end-position tuning without swapping out the entire unit.
This adjustable-stroke design is ideal for product changeovers, allowing you to dial in the exact stroke length during commissioning rather than relying on fixed stops. The extruded aluminum barrel features sensor grooves on both sides, ready to accept CMSE reed or DMSE electronic switches if a magnet is added later. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X140-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 140 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×140 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly adapt end-of-stroke positions from 110 to 140 mm during product size changeovers without disassembling tooling or adding external stopper blocks.
Fine-tune retract end positions during commissioning to achieve precise mechanical alignment, taking advantage of the built-in rear stopper screw.
Because the nominal stroke is 140 mm, side-loading is minimal, but always ensure external guides support the load for optimal bearing life.
The SAIJ100X140-30 is selected over a fixed SAI cylinder when machine setups demand variable end-stops or fine-tuning at commissioning. Remember that the rear adjuster acts strictly as a travel stop and does not hold the load without live air; for positive load-holding without pneumatic pressure, consider an AirTAC SAIL or BSAI cylinder. This unit uses a PT tapered port thread, a carbon steel rod, and no standard magnet.
Quick checklist
At 0.7 MPa, the push force increases to 5497 N.
The rear adjuster screw allows you to shorten the effective travel by up to 30 mm. This creates a usable stroke window of 110-140 mm, letting you fine-tune the end position without changing the cylinder or adding external stops.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.