verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ100 Adjustable Cylinder SAIJ100X140-40

The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X140-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 140mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke140 mm
  • Port sizeG1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$185.72 $201.95Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ100 stroke, mounting and version on one page All SAIJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X140-40

Its defining feature is a 40mm adjustment range that creates a 100-140mm usable travel window, allowing you to dial in the exact retract end-position during commissioning without swapping hardware. This fine-tuning capability is ideal for product-size changeovers on a line.

The extruded aluminum barrel features sensor grooves on both sides for straightforward switch placement. This SKU uses a standard carbon steel piston rod with an M20x1.5 thread, paired with G1/2 ports. The rear adjuster acts purely as a mechanical stop for deceleration and positioning—it does not lock the load without continuous live air pressure.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X140-40 Technical Specifications

ModelAirtac SAIJ100 Adjustable Cylinder SAIJ100X140-40
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke140 mm
Acting typeDouble acting
Port sizeG1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X140-40

SAIISO 15552 profile-barrel cylinder series.
100Bore size in mm.
×140Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X140-40 Is Used

tune

Machine Changeover

Dial in the 100-140mm retract position during product size changes without fabricating new external stopper blocks.

precision_manufacturing

End-Position Tuning

Fine-tune the final resting point of the tooling at commissioning to achieve exact contact alignment.

factory

Variable End Stops

Provide a flexible mechanical stop for automated lines processing parts of slightly varying lengths.

Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X140-40 the Right Cylinder?

The adjustable 100-140mm travel window is selected over a fixed-stroke SAI cylinder when you need variable end-stops or on-the-fly machine setup adjustments rather than relying on external shims.

Because the 140mm stroke is relatively short, side-loading is less of a concern than with longer travels, but the M20x1.5 rod still handles robust mechanical loads. To replace an ISO 15552 cylinder, match the 100mm bore, 140mm nominal stroke, 40mm adjustment, PT port threads, and mounting style (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Note that for load-holding without air, you must use a SAIL or BSAI variant, as the SAIJ adjuster is not a brake.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X140-40 FAQ

At 0.7MPa, the push force increases to 5497N.

The rear adjuster screw allows you to shorten the nominal 140mm stroke by up to 40mm, creating a usable travel window of 100-140mm. It functions as a mechanical stop to set the end position and does not lock the load without live air.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X140-40

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ100X140-40 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.