
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X140-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 140mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
It features a 25mm carbon steel piston rod and PT (tapered) G1/2 ports. By integrating an external stopper at the rear, this actuator allows you to fine-tune the end position during commissioning without adding external stops.
With a 140mm nominal stroke and a 50mm adjustment code, the usable travel window spans from 90mm to 140mm. The extruded aluminum barrel includes sensor grooves on both sides for straightforward positioning feedback. Remember that the rear adjuster functions strictly as a travel stop to set deceleration, not as a lock, so it cannot hold a load without live air pressure.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X140-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 140 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×140 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 90-140mm travel window during format changes to accommodate varying package sizes without replacing the actuator.
Fine-tune the retract position during machine commissioning using the rear screw, avoiding the need to bolt on extra physical stops.
The 50mm adjustable window is ideal for product-size changeovers on a line, letting you dial in the exact 90-140mm travel without swapping the cylinder for a fixed-stroke SAI model. If your process requires holding a load without continuous air, consider an SAIL or BSAI variant instead.
For ISO 15552 replacement matching, verify the 100mm bore, 140mm stroke, 50mm adjustment, PT G1/2 port, and Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounting. Because the 25mm rod handles side loads well, but for strokes of 300mm or more an external guide is recommended. This version uses a standard carbon steel rod and lacks a magnet for sensors.
Quick checklist
At 0.7 MPa, the push force increases to 5497N.
The rear adjuster acts as a mechanical stop that lets you trim the effective travel back by up to 50mm. This creates a usable stroke window of 90-140mm from the 140mm nominal stroke, though it functions only as a stop and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.