
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X145-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 145mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X145-10 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear mechanical stopper. A defining feature of this SKU is the 10mm adjustment range, which creates a precise 135-145mm usable travel window for fine-tuning the retract end position during commissioning.
This extruded aluminum profile cylinder uses a PT tapered port thread and includes variable air cushions at both ends to manage kinetic energy. The rear adjuster acts strictly as a travel stop to set deceleration limits and does not hold the load without live air pressure. For load-holding requirements without continuous air, an external rod lock or a related SAIL pneumatic lock cylinder is required.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X145-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 145 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×145 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within the 135-145mm window during machine commissioning without adding external stopper blocks.
Quickly adjust the stroke end by up to 10mm to accommodate varying product lengths on a high-thrust assembly line.
The 10mm adjustable stroke is ideal for machinery requiring variable end-stops during product size changeovers, eliminating the need to physically swap out a fixed-stroke SAI cylinder. When integrating this model, specify the PT port thread, the standard carbon steel rod, and your required mounting hardware from the available SAIJ set: Basic, FA, LB, TC, FTC, TCM1, or TCM2.
Because the 145mm stroke is relatively short for this large bore, side-loading risks are minimized compared to longer strokes, but the load should still be guided to prevent binding. This cylinder operates at speeds of 30-800mm/s. If position holding is needed upon loss of air pressure, note that the rear adjuster is not a brake, and a BSAI clamp-lock or pilot-operated check valve must be used.
Quick checklist
At 0.7 MPa, the push force increases to 5497N.
The rear adjuster screw allows you to shorten the nominal 145mm stroke by up to 10mm, creating a 135-145mm usable travel window. This stopper fine-tunes the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.