verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ100 Adjustable Cylinder SAIJ100X145-100

The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X145-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 145mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke145 mm
  • Port sizeG1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$185.72 $201.95Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ100 stroke, mounting and version on one page All SAIJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X145-100

Because this SKU carries a 100mm adjustment code, you can dial the 145mm nominal stroke back to any effective length between 45 and 145mm. This wide usable-travel window is ideal for prototyping or production lines where the exact end position must be finalized during commissioning without swapping hardware.

It features a 25mm carbon steel piston rod with an M20x1.5 thread, paired with a PT tapered G1/2 port. The extruded aluminum barrel includes sensor grooves on both sides, though this configuration omits the magnet, so adding CMSE or DMSE switches requires an -S variant. The rear adjuster acts purely as a mechanical stop to set the travel end and does not hold the load without live air.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X145-100 Technical Specifications

ModelAirtac SAIJ100 Adjustable Cylinder SAIJ100X145-100
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke145 mm
Acting typeDouble acting
Port sizeG1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X145-100

SAIISO 15552 profile-barrel cylinder series.
100Bore size in mm.
×145Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X145-100 Is Used

settings_input_component

Product Size Changeover

Leverage the 45-145mm travel window to accommodate multiple product lengths on a single conveyor line without physically replacing the actuator.

tune

Commissioning End-Stop Tuning

Fine-tune the retract position precisely during machine setup using the rear adjuster, avoiding the need to bolt on external stops or spacers.

Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X145-100 the Right Cylinder?

The 100mm adjustment range is exceptionally wide, allowing a single cylinder to cover multiple product sizes on a changeover line. For load-holding without continuous air pressure, pair this cylinder with an external pilot-operated check valve or select an AirTAC SAIL or BSAI model.

As a dimensionally interchangeable ISO 15552 cylinder, it matches standard footprints using a reduced mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). The PT port thread and carbon steel rod are standard. Because the nominal stroke is under 300mm, side-load stress is manageable, but always guide the load externally for rigid lateral stability.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X145-100 FAQ

The rear adjuster acts as a mechanical stop that lets you trim the effective travel from the 145mm nominal stroke down to as little as 45mm, creating a 100mm adjustment window. It only sets the end position and does not lock the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X145-100

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ100X145-100 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.