verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ100 Adjustable Cylinder SAIJ100X145-100S

The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X145-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 145mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke145 mm
  • Port sizeG1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$190.96 $207.53Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ100 stroke, mounting and version on one page All SAIJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X145-100S

The generous 100mm adjustment code transforms the 145mm nominal stroke into a highly flexible 45-145mm usable travel window. This allows you to dial in the exact retract end-position during commissioning without swapping hardware.

Fitted with a carbon steel rod and PT tapered ports, this unit includes a magnet for CMSE and DMSE sensors. The extruded aluminum barrel features sensor grooves on both sides. Remember that the rear adjuster functions purely as a mechanical stop for deceleration, not a lock, so live air is required to hold the load.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X145-100S Technical Specifications

ModelAirtac SAIJ100 Adjustable Cylinder SAIJ100X145-100S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke145 mm
Acting typeDouble acting
Port sizeG1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X145-100S

SAIISO 15552 profile-barrel cylinder series.
100Bore size in mm.
×145Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X145-100S Is Used

settings_input_component

Product Changeover

Quickly adapt the retract distance from 45 to 145mm on packaging lines handling varying container sizes without changing the cylinder.

tune

Commissioning Calibration

Fine-tune the exact end-stop position during machine setup to prevent crashes, using the rear screw rather than machining custom spacers.

Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X145-100S the Right Cylinder?

The 100mm adjustment range is ideal for machines running multiple product sizes, allowing rapid changeover by simply turning the rear screw rather than adding external stops or buying a fixed-stroke SAI cylinder. To replace an ISO 15552 cylinder, match the 100mm bore, 145mm stroke, PT port thread, and -S magnet requirement.

Because the nominal stroke is 145mm, side-load risks are moderate, but always ensure proper external guiding for optimal seal life. For load-holding without continuous air pressure, this standard adjuster will not suffice; consider an AirTAC SAIL or BSAI locking cylinder instead.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X145-100S FAQ

At 0.7 MPa, the push force increases to 5497N.

The rear adjuster acts as a mechanical stop that lets you trim the effective travel back by up to 100mm. This creates a usable stroke window of 45-145mm, allowing precise end-position tuning without replacing the cylinder.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X145-100S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ100X145-100S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.