
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X145-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 145mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
It features a carbon steel piston rod and PT tapered G1/2 ports. By integrating an external stopper, this model provides a usable travel window of 125 to 145 mm, allowing you to trim up to 20 mm off the nominal stroke without swapping hardware.
This adjuster acts purely as a mechanical travel stop for end-position tuning during commissioning or product changeovers, not as a load-holding lock. The extruded aluminum barrel includes sensor grooves on both sides, and because no magnet is specified here, you would add an -S suffix to the SKU if you need to track position with CMSE reed or DMSE electronic sensors.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X145-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 145 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×145 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly dial in the 125 to 145 mm stroke window when switching product sizes on a packaging line, using the rear screw to set the new end position without changing the cylinder.
Fine-tune the retraction point during machine commissioning to achieve precise mechanical alignment, preventing over-travel without adding external stopper blocks.
Provide a customizable retraction stop for automated assembly equipment where slight adjustments to the 145 mm nominal stroke are needed between production runs.
Choose this 100mm bore when an 80mm cylinder lacks thrust, as stepping down to an 80mm bore drops your 0.5 MPa push force to 2513N. The adjustable stroke is ideal for dialing in exact end positions on the fly, avoiding the need to bolt on external stops or buy a fixed-stroke SAI cylinder. For load-holding without live air pressure, note that the rear adjuster cannot hold the load; you would need an external rod lock or a different cylinder type like the SAIL or BSAI. To match this ISO 15552 footprint exactly, specify the 100mm bore, 145mm stroke, 20mm adjustment, PT G1/2 port, and your required mounting style from the reduced SAIJ set: Basic, FA, LB, TC, FTC, TCM1, or TCM2. Since the stroke is under 300mm, side-load risks are moderate, but the 25mm rod and M20x1.5 thread handle standard loads well.
Quick checklist
At 0.7 MPa, the push force increases to 5497N.
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective stroke by up to 20 mm. This creates a usable travel window of 125 to 145 mm, allowing you to fine-tune the end position at commissioning without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.