
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X145-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 145mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
It features a 25mm carbon steel piston rod and a PT tapered G1/2 port. By turning the rear screw, you can shorten the effective travel, creating a precise 115-145mm usable stroke window for exact end-position tuning.
This adjuster acts purely as a mechanical stop to set the retract position and relies on the integrated air cushions for end-of-stroke deceleration; it does not lock the load without continuous air pressure. For load-holding requirements without live air, consider the SAIL or BSAI variants. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to easily retrofit CMSE or DMSE switches if position feedback is later required.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X145-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 145 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×145 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 115-145mm travel window during production line format changes to accommodate varying package sizes without changing hardware.
Fine-tune the exact retract stop during machine commissioning to perfect part seating or clamping depth using the rear adjustment screw.
If you need less force, stepping down to an 80mm bore yields 2513N at 0.5 MPa, whereas moving up to 125mm provides 6136N. Choose this adjustable SAIJ model over a fixed-stroke SAI when you need to fine-tune the retract distance during commissioning or accommodate product-size changeovers without physically swapping the cylinder.
Because the 145mm stroke is well below the 1500mm maximum standard stroke, no external side-load guide is strictly necessary, though the robust 25mm rod and M20x1.5 thread handle substantial offset loads. This unit uses a PT tapered port thread and a carbon steel rod. It is dimensionally interchangeable per ISO 15552 mounting interfaces and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts (omitting FB, CA, CB, and CR).
Quick checklist
At 0.9 MPa, the push force increases to 7068N.
The rear adjuster screw allows you to mechanically trim the nominal 145mm stroke back by up to 30mm, resulting in a usable travel window of 115-145mm. The adjuster acts as a physical stop and does not hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.