
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X145-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 145mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X145-75 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 145 mm travel by up to 75 mm. This creates a highly flexible 70-145 mm usable travel window, perfect for dialing in exact end positions during machine commissioning.
The extruded aluminum barrel features sensor grooves on both sides for straightforward switch placement. This version uses a standard carbon steel piston rod and PT tapered port threads. It supports AirTAC CMSE reed and DMSE electronic sensors, giving you flexible detection options without needing a factory-installed magnet.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X145-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 145 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×145 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly reconfigure the 70-145 mm travel window to handle varying package dimensions on a packaging line without changing the cylinder.
Fine-tune the retract position during machine setup to perfectly align heavy 3927 N clamping forces against a hard stop.
Adjust the rear stopper to regulate the extension depth of a press or forming tool, accommodating different material thicknesses on the fly.
The 75 mm adjustment range is exceptionally wide, letting you accommodate multiple product sizes on a single line simply by turning the rear screw, rather than swapping out a fixed-stroke SAI cylinder or fabricating external mechanical stops.
For ISO 15552 replacement matching, verify the 100 mm bore, 145 mm stroke, 75 mm adjustment, G3/8 port, and your required mounting style. Note that SAIJ uses a specific mounting subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Because the stroke is 145 mm, the M20x1.5 rod thread provides excellent rigidity, though any long unsupported load still requires an external guide. Remember that the rear adjuster is a travel stop, not a lock; the cylinder cannot hold a load without live air, so consider a SAIL or BSAI model if true load-holding is required.
Quick checklist
At 0.7 MPa, the push force increases to 5497 N.
The rear adjuster acts as a mechanical stop that shortens the 145 mm nominal stroke by up to 75 mm, creating a usable travel window of 70 to 145 mm. It only sets the end position and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.