
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X15-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 15mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
It features a carbon steel piston rod and PT tapered port threads. Designed for short-travel tasks, its integrated stopper screw allows you to fine-tune the end position without adding external physical limits.
This specific SKU provides a usable travel window of 5-15mm, letting you dial back the 15mm nominal stroke by up to 10mm during commissioning. The extruded aluminum barrel includes sensor grooves on both sides, and because no magnet is specified, it arrives without sensing capabilities unless modified. The rear adjuster acts purely as a travel stop, meaning it cannot hold a load dynamically without continuous live air pressure.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X15-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly tune the end-stop position on packaging lines when switching material thicknesses, saving setup time without changing cylinders.
Holds heavy workpieces securely in machining fixtures using a very short travel distance, relying on the 100mm bore for high clamping force.
Choose this 100mm bore when you need heavy thrust in a very compact footprint; if your application requires less force, stepping down to an 80mm bore yields 2513N at 0.5 MPa. The adjustable stroke is ideal for applications requiring precise mechanical end-stop tuning during machine setup or product changeovers, replacing the need to swap out a fixed-stroke SAI cylinder. Ensure you match the exact ISO 15552 replacement parameters: 100mm bore, 15mm stroke, 10mm adjustment, PT port threads, and no magnet. For load-holding without live air pressure, you must integrate an external rod lock or look into the SAIL or BSAI series.
Because the stroke is under 300mm, side-load stress on the 25mm rod is minimal, though an external guide is still recommended for heavy lateral loads.
Quick checklist
At 0.7 MPa, the push force increases to 5497N.
The rear stopper screw lets you mechanically shorten the 15mm nominal stroke, providing a usable travel window of 5-15mm. This allows precise end-position tuning at commissioning without external stops, though it acts only as a stop and not a load lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.