
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X150-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 150mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
It features a carbon steel piston rod and a PT tapered port thread. Because the adjustment code is 100mm on a 150mm nominal stroke, you can dial back the retract end-position to anywhere within a 50-150mm usable travel window.
This wide adjustment band is ideal for product changeovers on a packaging line, letting you reset the end stop without swapping the cylinder. The extruded aluminum barrel includes sensor grooves on both sides, and the integrated -S magnet works directly with AirTAC CMSE reed and DMSE electronic solid-state switches. The rear screw acts purely as a travel stop for fine-tuning, not a load lock, so live air is required to hold position.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X150-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly reconfigure the 50-150mm stroke window on packaging lines to accommodate different carton heights without changing out the actuator.
Fine-tune the exact retract end-position during commissioning using the rear stopper screw, eliminating the need for external shims.
Adjust the stroke on the fly for pneumatic diverters that need to push different box sizes at varying distances along a conveyor belt.
The 100mm adjust code provides an exceptionally wide 50-150mm travel window, making it superior to a fixed-stroke SAI cylinder for machines that frequently process varying product sizes. To match this ISO 15552 cylinder, specify the 100mm bore, 150mm stroke, PT port thread, and your required mounting style from the SAIJ subset: Basic, FA, LB, TC, FTC, TCM1, or TCM2. Since the nominal stroke is 150mm, side-loading is minimal, but always guide the load externally for rigid assemblies. For dead-stop load holding without air pressure, use an external rod lock or specify a SAIL or BSAI cylinder instead of relying on the adjuster.
Quick checklist
The rear adjuster screw lets you trim the effective travel by up to 100mm. With the 150mm nominal stroke, this creates a highly flexible 50-150mm usable travel window. The screw functions as a mechanical stop for position tuning and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.