verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ100 Adjustable Cylinder SAIJ100X150-20

The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X150-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 150mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke150 mm
  • Port sizeG1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$185.72 $201.95Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ100 stroke, mounting and version on one page All SAIJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X150-20

It features a 25mm carbon steel piston rod and a G1/2 PT port. By integrating an external adjusting screw, this cylinder provides a usable travel window of 130 to 150mm, allowing you to dial in the exact retract position without swapping out the entire unit.

This adjustable-stroke design is ideal for fine end-position tuning during commissioning or product changeovers. The rear screw acts purely as a mechanical stop to set the travel end and is not a locking mechanism, meaning the cylinder cannot hold a load without live air pressure. For load-holding requirements, consider the SAIL or BSAI variants. The extruded aluminum barrel includes sensor grooves on both sides for straightforward CMSE or DMSE sensor integration.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X150-20 Technical Specifications

ModelAirtac SAIJ100 Adjustable Cylinder SAIJ100X150-20
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke150 mm
Acting typeDouble acting
Port sizeG1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X150-20

SAIISO 15552 profile-barrel cylinder series.
100Bore size in mm.
×150Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X150-20 Is Used

tune

Product Changeover

Quickly adjust the retract end-stop by up to 20mm when switching a packaging line to a different carton size, avoiding cylinder removal.

precision_manufacturing

Press Fit Tuning

Fine-tune the 130-150mm travel window during machine commissioning to achieve the exact seating force for pressing bearings without adding external stop blocks.

factory

Variable End Positioning

Dial in the precise retract distance on an assembly station to accommodate part tolerances, using the rear adjuster as a dedicated mechanical stop.

Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X150-20 the Right Cylinder?

The SAIJ100X150-20 is selected over a fixed-stroke SAI when a machine requires a variable end-stop to accommodate minor product size changes on the line. To match this ISO 15552 interchangeable cylinder exactly, specify the 100mm bore, 150mm stroke, 20mm adjustment range, G1/2 PT port, and carbon steel rod. Because the 150mm stroke is under 300mm, side-load stress is manageable, but external guides should still be used to protect the 25mm rod thread. The mounting hardware is limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X150-20 FAQ

At 0.7 MPa, the push force increases to 5497N.

The rear adjusting screw acts as a mechanical stop that lets you shorten the effective stroke from the nominal 150mm down to 130mm. It only sets the travel end and does not lock the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X150-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ100X150-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.