
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X150-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 150mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X150-20-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. This built-in adjustability allows you to fine-tune the retract end position during commissioning without swapping out the cylinder or adding external stops.
This variant includes a magnetic piston for position sensing and uses a standard carbon steel rod with a PT tapered port thread. It retains the extruded aluminum barrel design with sensor grooves on both sides, and the 25mm rod paired with an M20x1.5 thread provides robust resistance to side loading. The rear adjuster acts purely as a travel stop and does not hold the load without live air pressure.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X150-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly dial in the 130-150mm retract end-stop during product size changeovers on a packaging line without physically swapping hardware.
Fine-tune the final resting position of heavy actuators at commissioning to perfect alignment and avoid mechanical binding.
Provide a flexible physical stop for automated assembly equipment where downstream part dimensions vary slightly between runs.
The adjustable stroke is ideal for machine setups requiring variable end stops or product changeovers, providing flexibility that a fixed-stroke SAI cylinder cannot offer. For load-holding without continuous air pressure, you must use an external rod lock or pilot-operated check valve, as the SAIJ adjuster is a stop, not a locking mechanism.
To replace an ISO 15552 cylinder, match the 100mm bore, 150mm stroke, 20mm adjustment range, PT G1/2 port, and the -S magnet. Mounting options for this series include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Since this unit features a magnetic piston, it is fully compatible with AirTAC CMSE reed and DMSE electronic solid-state sensors.
Quick checklist
The rear adjuster screw acts as a mechanical stop that lets you trim the effective stroke back by up to 20mm. This creates a 130-150mm usable travel window, allowing you to fine-tune the retract position without changing the cylinder.
If you increase the pressure to 0.7 MPa, the push force rises to 5497N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.