
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X150-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 150mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X150-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 120-150 mm usable travel window from its 150 mm nominal stroke. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.
This adjustable-stroke design allows precise end-position tuning during commissioning without swapping the cylinder or adding external stops. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2. The rear adjuster acts strictly as a travel stop, meaning it does not hold the load without continuous live air pressure.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X150-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 120-150 mm stroke window during format changes without physically swapping the actuator or adding external shims.
Fine-tune the retract end-position at commissioning to achieve exact mechanical alignment before locking down the controls.
The 30 mm adjustment range is perfect for product changeovers on a line, letting you dial in the exact 120-150 mm end-stop on the fly instead of machining custom spacers. Because it is a double-acting cylinder, an external rod lock or pilot-operated check valve is required for load-holding without live air.
To match this ISO 15552 interchangeable cylinder, confirm the 150 mm stroke, 30 mm adjustment, PT G1/2 port, and standard carbon steel rod. With a 150 mm stroke, side-load risks are minimal, but always ensure the load is guided to prevent rod binding.
Quick checklist
At 0.7 MPa, the push force increases to 5497 N.
The rear adjuster acts as a mechanical stop that shortens the 150 mm nominal stroke by up to 30 mm, giving a usable travel window of 120-150 mm. It is a travel stop, not a lock, so it cannot hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.