
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X150-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 150mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X150-40 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, delivering robust performance for heavy-duty automation. A PT tapered port thread ensures a reliable, leak-free pneumatic connection.
This model provides a 110-150mm usable travel window, allowing you to dial back the nominal 150mm stroke by up to 40mm during commissioning. You can fine-tune the retract end position without swapping the cylinder or adding external stops. The extruded aluminum barrel includes sensor grooves on both sides, ready to accept AirTAC CMSE reed or DMSE electronic sensors if a magnet is specified later.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X150-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within the 110-150mm window during initial machine commissioning to perfect part seating without machining custom spacers.
Quickly adapt a packaging line to different carton depths by turning the rear adjuster up to 40mm, drastically reducing format changeover downtime.
The adjustable stroke is ideal for product-size changeovers on a line, letting operators set variable end stops on the fly instead of machining new hard stops. When matching an ISO 15552 replacement, verify the 150mm stroke, 40mm adjustment range, G3/8 port, and mounting style.
Because the 150mm stroke is relatively short, side-load risks are minimal, but always guide the load if offset forces exist. Remember that the rear adjuster acts purely as a travel stop and does not hold the load without live air; for dead-end load holding, consider an AirTAC SAIL or BSAI cylinder. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options.
Quick checklist
The rear adjuster acts as a mechanical stop that lets you shorten the effective travel from the nominal 150mm down to 110mm. It allows precise end-position tuning at commissioning without adding external stops, though it does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.