verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ100 Adjustable Cylinder SAIJ100X150-40S

The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X150-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 150mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke150 mm
  • Port sizeG1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$190.96 $207.53Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ100 stroke, mounting and version on one page All SAIJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X150-40S

The AirTAC SAIJ100X150-40-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 150 mm nominal stroke that can be dialed back by up to 40 mm, yielding a precise 110-150 mm usable travel window. The extruded aluminum barrel includes sensor grooves on both sides, and this -S variant includes a magnet for CMSE reed and DMSE electronic switches.

This model utilizes a robust 25 mm carbon steel rod with an M20x1.5 thread, paired with 36 mm air cushions at both ends to manage kinetic energy. The rear stopper acts purely as a travel end-deceleration device, not a lock, so live air is required to hold the load. Mounting options span Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR brackets.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X150-40S Technical Specifications

ModelAirtac SAIJ100 Adjustable Cylinder SAIJ100X150-40S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke150 mm
Acting typeDouble acting
Port sizeG1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X150-40S

SAIISO 15552 profile-barrel cylinder series.
100Bore size in mm.
×150Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X150-40S Is Used

tune

Product Changeover

Dial in the 110-150 mm travel window during format size changes on a packaging line, avoiding the need to physically swap out the entire actuator.

precision_manufacturing

End-Stop Calibration

Fine-tune the retract position during machine commissioning to prevent tooling crashes, using the rear screw rather than adding external mechanical stops.

Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X150-40S the Right Cylinder?

The adjustable 110-150 mm window is ideal for machine setups requiring product changeovers without physically swapping cylinders or adding external stops. Because the stroke is under 300 mm, side-load stress is minimal, though the rigid 25 mm rod still handles standard operational deflection well.

For a direct ISO 15552 interchangeable replacement, match the 100 mm bore, 150 mm stroke, 40 mm adjustment range, PT tapered port threads, and the -S magnet requirement. If your process demands holding the load without continuous air pressure, the SAIJ adjuster will not suffice; instead, look to the SAIL pneumatic lock or BSAI clamp-lock cylinder variants.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X150-40S FAQ

The rear adjuster screw allows you to shorten the 150 mm nominal stroke by up to 40 mm, creating a 110-150 mm usable travel window. This stopper only sets the end position; it does not lock the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X150-40S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ100X150-40S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.