
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X150-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 150mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
By integrating a 50mm adjustment screw, this unit allows you to fine-tune the effective travel anywhere within a 100-150mm window during commissioning. This eliminates the need to physically swap out the barrel or bolt on external stopper blocks when aligning end positions.
The bore dictates a G1/2 port and a robust 25mm carbon steel rod with an M20x1.5 thread, providing excellent resistance against side loads. It features standard variable air cushions at both ends to decelerate the payload smoothly. For position feedback, you can easily mount AirTAC CMSE or DMSE sensors into the dual-side extruded barrel grooves, though this specific configuration ships without a magnet.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X150-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 100-150mm travel window on the fly to accommodate different product lengths without changing the cylinder or adding external shims.
Use the 50mm rear screw to establish flexible end-stops for multi-format processing lines requiring quick physical adjustments.
The 50mm rear adjuster is ideal for product-size changeovers on a line, letting you dial in the exact end-stop without adding mechanical spacers. If your machine requires the load to be held securely without continuous live air pressure, note that this rear adjuster acts only as a travel stop and not a lock; you should instead specify an SAIL or BSAI cylinder, or utilize an external pilot-operated check valve.
To match this ISO 15552 cylinder for a direct replacement, verify the 100mm bore, 150mm nominal stroke, 50mm adjustment range, PT tapered port thread, and standard carbon steel rod. Because the nominal stroke is 150mm, side-loading is minimal, but always ensure the load is guided externally to prevent binding. Mounting is supported via Basic, FA, LB, TC, FTC, TCM1, and TCM2 brackets.
Quick checklist
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the 150mm nominal stroke by up to 50mm. This creates a usable travel window of 100-150mm for fine-tuning end positions without swapping the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.