
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X150-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 150mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X150-75 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 150 mm stroke that can be dialed back by up to 75 mm, creating a highly flexible 75-150 mm usable travel window.
This model features a robust 25 mm carbon steel rod with an M20x1.5 thread, paired with a G1/2 port for optimal flow. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to add CMSE or DMSE switches if needed. The rear stopper sets the travel end without holding the load, meaning live air is required to maintain position.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X150-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 75-150 mm retract window instantly when switching between product sizes on a packaging line, avoiding physical hardware swaps.
Fine-tune the exact end-of-stroke position during initial commissioning to perfect pressing or forming operations without external stoppers.
Use the 75 mm adjustment range to accommodate multiple part heights in a single automated fixture, maximizing production flexibility.
The 75 mm adjustment range is exceptionally wide, making it perfect for product-size changeovers on a packaging line where the retract distance varies significantly between runs. Unlike a fixed SAI cylinder, this adjustable version eliminates the need to swap hardware or add external stops when fine-tuning the end position.
When replacing an ISO 15552 cylinder, match the 100 mm bore, 150 mm stroke, 75 mm adjustment, PT port thread, and mounting style. SAIJ supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, omitting FB, CA, CB, and CR options. For load-holding without live air pressure, consider a SAIL or BSAI cylinder instead, as the rear adjuster functions only as a travel stop. Because the stroke is under 300 mm, side-load risks are minimal, but external guides are still recommended for heavy lateral loads.
Quick checklist
At 0.7 MPa, the push force increases to 5497 N.
The rear adjuster acts as a mechanical stop that shortens the 150 mm nominal stroke by up to 75 mm, providing a usable travel window of 75-150 mm. It sets the travel end but does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.