
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X150-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 150mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X150-75-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. The integrated -S magnet enables position detection with AirTAC CMSE reed or DMSE electronic sensors.
With a nominal 150mm stroke and a 75mm adjustment code, this model yields a wide usable travel window of 75-150mm. This allows you to dial back the retract end-position by up to 75mm during commissioning without swapping the cylinder or adding external stops. It includes variable air cushions at both ends and operates at speeds between 30-800mm/s.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X150-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Ideal for packaging lines that run multiple carton sizes, using the 75mm adjustment window to rapidly reconfigure the retract end-stop without changing cylinder hardware.
Perfect for assembly stations requiring exact retract positioning, allowing operators to fine-tune the 75-150mm travel window during commissioning rather than machining external spacers.
The 75mm adjustment window is exceptionally broad, making it ideal for machines processing multiple product sizes on a single line, replacing the need for several fixed-stroke SAI units. If your application requires holding a load without live air pressure, note that the rear adjuster acts only as a travel stop; you should instead select an SAIL or BSAI locking cylinder.
For an exact ISO 15552 replacement, match the 100mm bore, 150mm stroke, 75mm adjustment, PT tapered port threads, and the -S magnet. Because the travel can be dialed back significantly, ensure your mechanical layout accommodates the longest possible 150mm stroke to avoid hard mechanical collisions during initial setup.
Quick checklist
At 0.7 MPa, the push force increases to 5497N.
The rear adjuster acts as a mechanical stop that lets you shorten the effective stroke from its 150mm nominal length down to as little as 75mm, creating a 75-150mm usable travel window. It only sets the travel end and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.