
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X155-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 155mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X155-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel down from 155 mm to a minimum of 55 mm.
This bore size features a robust 25 mm carbon steel piston rod and a G1/2 PT port for high airflow. The rear adjuster functions strictly as a mechanical stop to set the retraction end position; it does not lock or hold the load without continuous air pressure. For load-holding requirements, an external rod lock or a related SAIL pneumatic-lock cylinder is required.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X155-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 55-155 mm travel window during product size transitions to set new retraction endpoints without changing cylinder hardware.
Use the 100 mm rear adjuster to safely trim the stroke during initial machine setup, avoiding the need to bolt on external physical stops.
The generous 100 mm adjustment range is ideal for product lines requiring frequent format changes, acting as a variable end-stop that saves the cost of stocking multiple fixed-stroke SAI cylinders. To match this exact ISO 15552 footprint, specify a 100 mm bore, 155 mm stroke, 100 mm adjustment, G1/2 PT port, and standard carbon steel rod.
Because the 155 mm stroke is relatively short for this bore size, side-loading risks are minimal, but the heavy 25 mm rod still requires linear guidance if subjected to lateral forces. The SAIJ supports a reduced mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options. Without a magnet, this unit cannot host CMSE or DMSE sensors.
Quick checklist
It reaches a maximum of 801 kgf at 1.0 MPa.
The rear mechanical stopper allows you to shorten the 155 mm nominal stroke by up to 100 mm, creating a usable travel window of 55 to 155 mm. It acts only as a travel stop and does not hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.