
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X155-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 155mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X155-20-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The integrated -20 mm adjustment screw allows you to fine-tune the effective travel window down from the 155 mm nominal stroke to a precise 135 mm minimum, eliminating the need for external stops during machine commissioning.
This variant includes a magnet for position sensing and uses a standard carbon steel piston rod with an M20x1.5 thread. Because it is an extruded aluminum profile cylinder, it features sensor grooves on both sides for direct mounting of CMSE reed or DMSE electronic switches. The rear adjuster functions strictly as a travel stop to set the end position, not as a lock, so live air is required to hold the load.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X155-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 135-155 mm travel window during format changes without physically replacing the cylinder or adding external shims.
Fine-tune the retract position at machine commissioning to achieve exact positioning using the rear adjustment screw.
The adjustable stroke is ideal for product changeovers on a line, allowing you to dial in the 135-155 mm travel window without swapping the cylinder. If your process requires holding a load without continuous air pressure, you must add an external rod lock or pilot-operated check valve, as the rear adjuster only sets the travel end.
For a direct ISO 15552 interchangeable replacement, match the 100 mm bore, 155 mm stroke, PT tapered port (G1/2), and -S magnet. Mounting options for this series include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Since the 155 mm stroke is relatively short, side-load stress is minimal, but the M20x1.5 rod still requires external guiding if subjected to lateral forces.
Quick checklist
At 0.9 MPa, the push force increases to 7068N.
The rear adjuster acts as a stop, allowing you to shorten the 155 mm nominal stroke by up to 20 mm. This creates a usable travel window of 135-155 mm for fine-tuning the end position without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.