
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X155-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 155mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X155-30-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 125 to 155 mm. The integrated -S magnet enables precise tracking using CMSE reed or DMSE electronic solid-state sensors housed in the dual-side barrel grooves.
This model features a 25 mm carbon steel rod with an M20x1.5 thread, paired with 36 mm air cushions at both ends to manage kinetic energy. The PT tapered port thread guarantees a reliable pneumatic seal. Because the rear stopper acts solely as a travel end limit and not a lock, live air pressure must be maintained to hold a load in place.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X155-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the retract end position within the 125-155 mm window during product size changeovers without physically swapping out the actuator.
Dial in the exact end-of-stroke position during initial commissioning to perfect part seating or clamping depth on heavy fixtures.
Selecting this 100 mm bore cylinder makes sense when your application requires substantial thrust, such as stepping up from a 80 mm bore that yields 2513 N at 0.5 MPa. The adjustable 30 mm window allows you to dial in the exact retract position during commissioning or product changeovers without adding external physical stops. For load-holding without continuous air pressure, consider the SAIL or BSAI series, as the SAIJ adjuster is not a locking mechanism.
When replacing an ISO 15552 cylinder, match the 100 mm bore, 155 mm stroke, 30 mm adjustment range, PT port threads, and the -S magnet requirement. Although the 155 mm stroke is relatively short, the 25 mm rod handles side loads effectively, yet any application with extended unsupported travel should still incorporate an external guide. The SAIJ mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
At 0.7 MPa, the push force increases to 5497 N.
The rear adjuster screw allows you to reduce the effective travel from the 155 mm nominal stroke down to 125 mm. This provides a 30 mm tuning window to set the exact end position without needing external stops.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.