
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X155-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 155mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X155-50-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 105 to 155 mm. The integrated -S magnet enables position sensing via AirTAC CMSE reed or DMSE electronic switches mounted into the dual-side sensor grooves.
This adjustable-stroke design allows precise end-position tuning during commissioning without swapping the cylinder or adding external stops. It features a standard carbon steel piston rod with an M20x1.5 thread, paired with PT tapered port threads. The rear adjuster acts strictly as a travel stop for deceleration and setup, not as a load-holding lock.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X155-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 105-155 mm stroke window on the fly during packaging line format changes, using the rear screw to set new end positions without disassembling the actuator.
Fine-tune the retraction end-point during initial commissioning to achieve exact tooling alignment, absorbing mechanical tolerances without adding external stopper blocks.
Choose this 100 mm bore cylinder when an application requires substantial thrust—7068 N at 0.9 MPa—alongside variable end-stop positioning. If the 155 mm stroke needs frequent trimming for product-size changes, the 50 mm adjustment window is ideal. For lighter loads requiring less force, stepping down to an 80 mm bore yields 4523 N. Because the stroke is 155 mm, external side-load guides are recommended to protect the M20x1.5 rod.
When replacing an ISO 15552 cylinder, match the 100 mm bore, 155 mm stroke, 50 mm adjustment, PT port threads, and the -S magnet. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2. Remember that the rear adjuster only sets the travel end; for load-holding without live air pressure, use an external rod lock or select an AirTAC SAIL or BSAI cylinder.
Quick checklist
The rear adjuster screw allows you to shorten the effective stroke by up to 50 mm. This creates a usable travel window of 105 to 155 mm, letting you fine-tune the end position at commissioning without changing the cylinder.
It operates efficiently at speeds between 30 and 800 mm/s.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.