
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X155-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 155mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
By integrating a 75mm adjustment mechanism onto a 155mm nominal stroke, it yields a highly flexible 80-155mm usable travel window. This allows operators to dial in the exact retract end-position during commissioning without swapping out the entire actuator.
Built with a carbon steel piston rod and a G1/2 port, this model handles dynamic loads up to 7068N at 0.9 MPa. The extruded aluminum barrel features sensor grooves on both sides for direct mounting of CMSE reed or DMSE electronic switches. It is important to note that the rear adjuster functions strictly as a travel stop, meaning the cylinder cannot hold a load without continuous live air pressure.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X155-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly reconfigure the 80-155mm travel window when a packaging line switches to a different carton size, using the rear screw to set new retract limits without changing cylinders.
Dial in the exact retract distance during machine commissioning to perfect a pressing operation, absorbing mechanical tolerances without adding external stopper blocks.
Selecting this 100mm bore actuator makes sense when your application requires substantial thrust but variable retract distances. If you need less force, stepping down to an 80mm bore provides 2513N at 0.5 MPa; moving up to a 125mm bore yields 6136N. The SAIJ100X155-75 is specifically chosen over a fixed-stroke SAI when machinery processes multiple product sizes, allowing the end-stop to be fine-tuned on the fly.
For a direct ISO 15552 replacement, match the 100mm bore, 155mm stroke, 75mm adjustment, PT tapered port threads, and your required mounting style. SAIJ supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, deliberately omitting FB, CA, CB, and CR options. Because the 155mm stroke is relatively short, side-load stress is minimal, though the robust 25mm rod and M20x1.5 thread naturally handle higher off-center loads than smaller bores. For load-holding without air pressure, consider an external rod lock or the SAIL/BSAI series instead.
Quick checklist
It features a rear adjusting screw that acts as a mechanical stop, allowing you to trim the effective stroke by up to 75mm. This creates a usable travel window of 80-155mm, enabling fine-tuning of the retract position without replacing the cylinder.
If operated at 0.9 MPa, the push force increases to 7068N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.