verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ100 Adjustable Cylinder SAIJ100X155-75S

The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X155-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 155mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke155 mm
  • Port sizeG1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$196.86 $213.84Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ100 stroke, mounting and version on one page All SAIJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ100 Adjustable Cylinder SAIJ100X155-75S

The AirTAC SAIJ100X155-75-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. By integrating a -S magnet, this unit supports AirTAC CMSE reed and DMSE electronic sensors housed within the dual-side extruded aluminum barrel grooves.

This specific SKU provides a nominal 155mm stroke that can be dialed back by up to 75mm, creating an 80-155mm usable travel window. The rear stopper screw allows precise end-position tuning during commissioning without swapping the cylinder or adding external stops. It utilizes a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X155-75S Technical Specifications

ModelAirtac SAIJ100 Adjustable Cylinder SAIJ100X155-75S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke155 mm
Acting typeDouble acting
Port sizeG1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100X155-75S

SAIISO 15552 profile-barrel cylinder series.
100Bore size in mm.
×155Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100X155-75S Is Used

tune

Variable Product Changeover

Leverage the 80-155mm travel window to rapidly reconfigure end-stops on a packaging line without physically swapping cylinders when processing different carton sizes.

factory

Sensor-Ready Automation

Utilize the built-in magnet with CMSE reed or DMSE electronic sensors in the dual-side grooves to confirm the adjusted end-of-stroke position in automated assembly cells.

Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100X155-75S the Right Cylinder?

The 75mm adjustment range is exceptionally wide, making it ideal for machines processing multiple product sizes on a single line. The PT tapered port and G1/2 thread interface match standard pneumatic manifolds. For load-holding without live air pressure, note that the rear adjuster is a travel stop, not a lock; you must use an external rod lock, a pilot-operated check valve, or switch to an AirTAC SAIL or BSAI cylinder.

When replacing an ISO 15552 cylinder, match the 100mm bore, 155mm stroke, 75mm adjustment, PT port, and -S magnet. Since the stroke is 155mm, side-load risks are moderate, but the robust 25mm rod handles typical loads well; ensure external guiding for heavy off-center payloads. Operating speed ranges from 30-800mm/s.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ100 Adjustable Cylinder SAIJ100X155-75S FAQ

At 0.7 MPa, the push force increases to 5497N.

The rear adjuster acts as a mechanical stop that shortens the effective travel. With a 155mm nominal stroke and a 75mm adjustment code, you can set the actual travel anywhere within an 80-155mm window. The adjuster is a stop, not a lock, and requires live air to maintain position.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100X155-75S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ100X155-75S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.