
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X160-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 160mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X160-30 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. By turning the rear stopper screw, you can trim the effective retract travel, creating a precise 130-160 mm usable window for exact end-position tuning.
This built-in adjuster acts purely as a mechanical stop to set the travel end and relies on the variable air cushions for deceleration; it does not lock or hold the load without live air pressure. For load-holding requirements without continuous air, consider the SAIL or BSAI variants. The extruded aluminum barrel features sensor grooves on both sides, ready to accept CMSE reed or DMSE electronic switches if a magnet is specified later.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X160-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 130-160 mm travel window during format changes on packaging lines, ensuring the rod retracts exactly to the new product dimensions without mechanical rebuilds.
Fine-tune the final retract position during machine setup to perfect tooling alignment, using the rear screw rather than adding separate external stopper blocks.
Choose this 100 mm bore when a 50 mm bore (982 N at 0.5 MPa) lacks the thrust for heavier fixtures, but an 80 mm bore (2513 N) leaves insufficient safety margin. The 30 mm adjustment range is ideal for product-size changeovers on a line, allowing you to fine-tune the end stop at commissioning without swapping the cylinder or adding external physical stops. Since the nominal stroke is 160 mm, side-loading is moderate, but always ensure the load is guided externally to prevent rod binding.
When specifying a replacement, match the 100 mm bore, 160 mm stroke, 30 mm adjustment, G1/2 PT port, and standard carbon steel rod. This SAIJ model uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets. It operates at speeds of 30-800 mm/s and does not include a magnet for sensors.
Quick checklist
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective stroke by up to 30 mm. This creates a usable travel window of 130 to 160 mm, allowing precise end-position tuning at commissioning without changing the cylinder.
At 0.7 MPa, the push force increases to 5497 N. The maximum operating pressure is 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.