
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X160-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 160mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X160-40 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 160 mm travel by up to 40 mm. This creates a usable end-position window of 120-160 mm, allowing precise fine-tuning at commissioning without swapping out the entire unit.
This model features a 25 mm carbon steel piston rod with an M20x1.5 thread, providing a rigid interface that handles substantial side loads, though long unsupported strokes still require external guidance. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR configurations.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X160-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 120-160 mm travel window during format changeovers on packaging lines, using the rear stopper to adapt to different carton depths without changing cylinders.
Fine-tune the end position during initial commissioning to achieve exact pressing or clamping depth, avoiding the need to add external shims or physical stops.
Handle high-force bending or forming tasks where the material thickness varies slightly, letting the 40 mm adjustment range absorb differences on the retract end.
Select this 100 mm bore actuator when an application requires high force combined with variable end-stops, such as accommodating product size changes on a line. Conversely, if you need more power, a 125 mm bore provides 6136 N. The PT tapered port threads (G1/2) ensure a tight pneumatic seal.
The rear adjuster functions strictly as a mechanical stop to set the travel end, not as a locking device. It cannot hold a load without continuous live air pressure. For load-holding during air loss, consider an AirTAC SAIL or BSAI cylinder, or integrate an external pilot-operated check valve. Because this model lacks the -S magnet option, it cannot host CMSE or DMSE sensors.
Quick checklist
At 0.9 MPa, the push force increases to 7068 N.
The rear adjuster acts as a mechanical stop that shortens the effective travel from the nominal 160 mm down to a minimum of 120 mm. It sets the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.