
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X160-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 160mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X160-75 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. By turning the rear screw, you can trim the nominal 160mm stroke back by up to 75mm, creating a precise 85-160mm usable travel window without swapping hardware.
This rear adjuster functions strictly as a mechanical stop to fine-tune the end position during commissioning; it does not lock the load without live air. The extruded aluminum barrel includes sensor grooves on both sides, and with a PT G1/2 port, it supports speeds from 30-800mm/s. It uses a reduced mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X160-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 85-160mm travel window on the fly to accommodate different package sizes on a packaging line without changing out the entire actuator.
Fine-tune the retract stop during machine commissioning to dial in exact pressing or clamping depth, avoiding the need for external shims.
Use the 75mm adjustment screw to set multiple retract endpoints for multi-stage processes within a single automated workcell.
The 75mm adjustment range is ideal for product-size changeovers, allowing you to shift the end-stop dynamically rather than machining external stops or reverting to a fixed-stroke SAI cylinder. For load-holding without continuous air pressure, integrate an external rod lock or specify an SAIL or BSAI cylinder, as the SAIJ adjuster only halts travel.
To replace an ISO 15552 cylinder, match the 100mm bore, 160mm stroke, 75mm adjustment, PT G1/2 port, and your required mounting style. Because the stroke is 160mm, the 25mm rod handles standard side loads adequately, but always verify guide alignment to prevent binding during the 85-160mm adjustable travel window.
Quick checklist
If you increase the operating pressure to 0.7MPa, the push force rises to 5497N.
The rear adjuster acts as a mechanical stop that lets you shorten the 160mm nominal stroke by up to 75mm, resulting in an 85-160mm usable travel window. It sets the end position but does not hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.