
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X165-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 165mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X165-10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 155-165 mm usable travel window, allowing you to dial back the nominal 165 mm stroke by up to 10 mm during commissioning without adding external stops.
This extruded aluminum profile barrel integrates variable air cushions at both ends to manage end-of-travel kinetic energy. The standard carbon steel piston rod features an M20x1.5 thread, and the G1/2 PT port ensures high flow for the bore's 30-800 mm/s speed range. The rear adjuster acts purely as a travel stop and does not hold the load without live air pressure.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X165-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within a 155-165 mm window during initial commissioning without swapping out cylinders or fabricating external stopper blocks.
Quickly adjust the end-of-stroke stop by up to 10 mm to accommodate slight variations in product sizes on a packaging line, minimizing downtime.
The 10 mm adjustable stroke is ideal for fine-tuning the retract end-position during machine setup or product changeover, offering flexibility that a fixed-stroke SAI cylinder cannot match.
For load-holding without continuous air pressure, note that the SAIJ rear adjuster is a stop, not a lock; consider an AirTAC SAIL or BSAI cylinder for fail-safe holding. Mounting options include the reduced SAIJ set: Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Because the 165 mm stroke is relatively short, side-load risks are minimal, but external guides are still recommended for optimal rod longevity.
Quick checklist
The maximum push force is 7068 N at 0.9 MPa.
A rear external screw acts as a mechanical stop, allowing you to shorten the effective stroke from 165 mm down to 155 mm. This adjuster sets the travel end and requires live air pressure to hold the load; it does not function as an independent lock or brake.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.