
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X165-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 165mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X165-100 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. With a nominal 165mm stroke and a 100mm adjustment range, the usable travel window can be dialed back anywhere from 65mm to 165mm to perfectly tune the retract end position during commissioning.
The external adjuster acts purely as a mechanical stop for deceleration and does not hold the load without live air pressure. For load-holding without continuous air, a SAIL or BSAI variant is required. This model features a standard carbon steel rod and omits the FB, CA, CB, and CR mounting options, utilizing a reduced set of ISO 15552 accessories including Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X165-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Rapidly reconfigure the retract end-stop for different product sizes on a packaging line without physically swapping out the cylinder.
Fine-tune the exact retract position during commissioning to absorb mechanical tolerances and achieve precise alignment.
Dial in the 65-165mm travel window to accommodate varying material lengths or pusher depths in automated assembly.
The 100mm adjustment range on a 165mm stroke provides a massive 65-165mm travel window, making it ideal for product changeovers on a packaging line where the retract position varies significantly, saving you from swapping cylinders or adding external stops. Because the rear screw is a travel stop and not a lock, it cannot hold a load without live air pressure.
When integrating this cylinder, note the PT tapered port thread and the lack of a standard magnet, meaning position sensing via CMSE or DMSE switches is not supported out of the box. With a 165mm stroke, the 25mm rod diameter handles moderate side loads well, but any long unsupported tooling should still be guided externally to prevent premature seal wear.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 801 kgf of push force.
The SAIJ100X165-100 has a nominal 165mm stroke with a 100mm rear adjuster, creating a usable travel window of 65-165mm. The rear screw mechanically limits the retract distance, allowing you to shorten the stroke without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.