
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X165-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 165mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X165-100-S is a double-acting ISO 15552 profile cylinder with a rear stroke adjuster, equipped with a magnet for CMSE and DMSE sensors. With a 165 mm nominal stroke and a 100 mm adjustment range, it provides a wide 65-165 mm usable travel window. This allows you to dial in the exact retract end-position during commissioning without swapping the cylinder or adding external stops.
Featuring a 25 mm carbon steel rod and M20x1.5 rod thread, this 100 mm bore profile cylinder handles robust side loads while operating at 30-800 mm/s. The rear adjuster acts as a travel stop to decelerate the load, but it does not hold the load without live air pressure. For position holding without pressure, an external rod lock or SAIL cylinder is required.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X165-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 65 to 165 mm retract position for machining jigs without machining custom spacers or changing the cylinder.
Quickly adjust the stroke length by up to 100 mm to accommodate different package sizes on a conveyor sorting line.
Fine-tune the end-of-travel position during machine setup to absorb mechanical tolerances and achieve precise alignment.
If your setup needs less force, stepping down to an 80 mm bore provides 2513 N, which may suffice for lighter duties. The 100 mm adjustment range on this SKU is ideal for machines requiring significant product changeover flexibility, offering a far wider tuning window than a fixed-stroke SAI cylinder.
When replacing an ISO 15552 cylinder, match the 100 mm bore, 165 mm stroke, 100 mm adjustment, PT tapered port thread, and the -S magnet requirement. Mounting options for the SAIJ series include Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR variants. Because the nominal stroke is 165 mm, an external guide is not strictly required for side loads, but is recommended for optimal travel stability.
Quick checklist
At 0.9 MPa, the push force increases to 7068 N.
The rear adjusting screw acts as a mechanical stop, allowing you to trim the 165 mm nominal stroke back by up to 100 mm. This creates a usable travel window of 65 to 165 mm, enabling precise end-position tuning without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.