
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X165-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 165mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X165-20 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 145-165 mm usable travel window, allowing you to dial back the nominal 165 mm stroke by up to 20 mm during commissioning.
The PT-tapered G1/2 port supplies ample airflow for its 30-800 mm/s speed range. A defining trait of this SAIJ variant is its reduced mounting set: it supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 interfaces, deliberately omitting FB, CA, CB, and CR options found on some standard lines. The carbon steel rod pairs with a 25 mm diameter and M20x1.5 thread, yielding high side-load resilience, while the extruded aluminum barrel features dual sensor grooves for flexible switch placement.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X165-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 145-165 mm travel endpoint during product family transitions without swapping the physical cylinder or adding external mechanical stops.
Dial in the exact retraction point during commissioning to accommodate varying workpiece lengths, utilizing the 20 mm adjustment range for optimal flexibility.
Select this 100 mm bore actuator when an application requires heavy thrust combined with variable end-stops, stepping up from an 80 mm bore that yields 4523 N at 0.9 MPa. The adjustable 145-165 mm window is ideal for product-size changeovers on a line, removing the need to physically swap cylinders or bolt on external stops. If you need to hold a load statically without live air pressure, note that the rear adjuster functions strictly as a travel stop and not a lock; you should instead specify an AirTAC SAIL or BSAI series.
For an exact ISO 15552 replacement match, confirm the 100 mm bore, 165 mm stroke, 20 mm adjustment range, PT port thread, and the required mounting style. Because this is a non-magnet model, position sensing requires adding a magnet (-S) to operate AirTAC CMSE reed or DMSE electronic solid-state switches in the dual barrel grooves.
Quick checklist
It can reach a maximum of 801 kgf at 1.0 MPa.
The rear adjuster acts as a mechanical stop that trims the effective travel, creating a 145-165 mm usable window. It sets the end position but does not lock or hold the load without continuous live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.