
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X165-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 165mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X165-30-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel within a 135-165 mm window. The extruded aluminum barrel includes sensor grooves on both sides, and the integrated -S magnet enables position detection using AirTAC CMSE reed or DMSE electronic solid-state switches.
This model features a 25mm carbon steel rod and a G1/2 port for optimal flow. The rear adjuster acts purely as a mechanical stop to set the retract end position and relies on the variable air cushions for deceleration; it does not hold the load without live air. For secure load-holding without pressure, consider the SAIL or BSAI variants. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X165-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within the 135-165mm window during commissioning without changing the cylinder or adding external mechanical stops.
Quickly adjust the stroke by up to 30mm to accommodate different product sizes on the same production line, minimizing downtime.
The adjustable stroke is ideal for machine setups requiring variable end stops or product changeovers, preventing the need to swap cylinders or add external stops. When replacing an ISO 15552 cylinder, match the 100mm bore, 165mm nominal stroke, 30mm adjustment, PT port thread, and -S magnet.
With a 165mm stroke, side loads are moderate, but for any application exceeding 300mm of travel, an external guide is highly recommended to prevent rod binding. The 25mm rod thread handles high side loads effectively. Note that the rear adjuster is a travel stop, not a lock, so external rod locks or pilot-operated check valves are required if the load must be held without continuous air pressure.
Quick checklist
The maximum thrust is 801 kgf at 1.0 MPa.
The rear adjusting screw acts as a mechanical stopper, allowing you to shorten the 165mm nominal stroke by up to 30mm, creating a usable travel window of 135-165mm. It sets the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.