
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X165-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 165mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
It features a carbon steel piston rod and a PT G1/2 port. The external adjusting screw at the rear allows you to shorten the nominal 165mm stroke by up to 40mm, creating a precise 125-165mm usable travel window for fine end-position tuning.
This adjuster functions strictly as a mechanical stop to set the retract deceleration point and does not hold the load without live air pressure. The extruded aluminum barrel includes sensor grooves on both sides for adding CMSE reed or DMSE electronic switches if a magnet is specified later. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X165-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 125-165mm travel window during setup to dial in exact retract positions without machining external stopper blocks.
Quickly adapt the end-stop on automated lines when switching between product sizes that require slightly different cylinder strokes.
The adjustable stroke is ideal for machine commissioning or product changeover, allowing you to dial in the end-stop without swapping cylinders or adding external stops. For load-holding without live air, select a SAIL or BSAI cylinder instead, as the SAIJ adjuster is not a lock. When replacing an ISO 15552 unit, match the 165mm stroke, 40mm adjustment, G1/2 port, and mounting style.
Quick checklist
If operating at 0.7 MPa, the push force increases to 5497N.
The rear adjuster acts as a mechanical stop that lets you trim the effective travel back from the 165mm nominal stroke by up to 40mm, resulting in a 125-165mm usable window. It sets the travel end but does not lock the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.