
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X165-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 165mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X165-50 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 165 mm stroke that can be fine-tuned down by up to 50 mm, yielding a usable travel window of 115-165 mm.
This model features a carbon steel piston rod with an M20x1.5 thread, paired with PT tapered port threads and a G1/2 air connection. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. You can install reed CMSE or solid-state DMSE sensors, though adding a magnet requires specifying the -S option at order. Adjustment is handled via an external stopper at the rear, which works alongside the standard variable air cushions at both ends to decelerate the load.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X165-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within the 115-165 mm window during product size changeovers, eliminating the need to physically swap out cylinders or bolt on external mechanical stops.
Fine-tune the effective stroke by up to 50 mm at commissioning to perfect the deceleration distance, allowing the integrated air cushions to absorb kinetic energy smoothly without hard impacts.
The adjustable stroke is ideal for product changeovers on a line, allowing you to shift the retract stop by up to 50 mm without swapping the cylinder or adding external stops. When replacing an ISO 15552 cylinder, match the 100 mm bore, 165 mm stroke, 50 mm adjuster, G1/2 port, and mounting style.
Because the nominal stroke is 165 mm, side-load risks are moderate, but you should still ensure adequate external guiding for heavy loads. Remember that the rear adjuster is a travel stop, not a locking device; this SAIJ cylinder will not hold its position without live air pressure. For load-holding requirements without continuous air, consider an AirTAC SAIL or BSAI cylinder. The SAIJ supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, omitting FB, CA, CB, and CR options.
Quick checklist
At 0.7 MPa, the push force increases to 5497 N.
The rear adjuster acts as an external stopper that lets you shorten the 165 mm nominal stroke by up to 50 mm, creating a usable travel window of 115-165 mm. It sets the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.