
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X165-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 165mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X165-75-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 90 to 165 mm. The integrated -S magnet enables position feedback via AirTAC CMSE reed and DMSE electronic sensors mounted in the dual-side barrel grooves.
This model features a carbon steel piston rod and PT tapered port threads. The rear adjustment screw acts purely as a travel stop for fine-tuning end positions during commissioning; it does not lock the load without live air pressure. SAIJ mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR styles found on some standard variants.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X165-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 90-165 mm travel window during product size transitions to set new end positions without physically swapping cylinders on the line.
Fine-tune the retract stop during commissioning to absorb mechanical tolerances and achieve exact positioning before locking the setup.
Choose this 100 mm bore when an application requires substantial thrust—stepping down to an 80 mm bore reduces push force to 2513 N at 0.5 MPa. The 75 mm adjustment range is ideal for product changeovers, allowing you to dial in a new end-stop without swapping the cylinder or adding external physical stops. For holding loads unpowered, select a SAIL or BSAI cylinder instead, as the SAIJ adjuster only halts travel.
To replace an ISO 15552 cylinder, match the 100 mm bore, 165 mm stroke, 75 mm adjustment, G3/8 port, and -S magnet. Because the stroke exceeds 300 mm on larger variants, long unsupported loads require an external guide, though this 165 mm unit manages moderate side loads well with its 25 mm rod and M20x1.5 thread.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 801 kgf.
The rear adjuster screw lets you shorten the 165 mm nominal stroke by up to 75 mm, creating a usable travel window of 90 to 165 mm. This stopper sets the end position but does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.