
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X170-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 170mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X170-10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 160-170 mm usable travel window, allowing you to dial back the nominal 170 mm stroke by up to 10 mm during commissioning without adding external stops.
This extruded aluminum profile barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic switches. The 25 mm carbon steel piston rod and M20x1.5 rod thread provide high rigidity, while the mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options. The rear adjuster acts purely as a travel stop for deceleration, so it will not hold a load without live air pressure.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X170-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end-of-stroke position within a 160-170 mm window during initial commissioning to achieve precise mechanical alignment.
Quickly adapt the cylinder's effective stroke by up to 10 mm on packaging lines when switching to a slightly different product size.
The 10 mm adjustable window is ideal for fine-tuning end positions during machine setup or product changeover, offering more flexibility than a fixed-stroke SAI cylinder. If your process requires holding a load without continuous air pressure, select a SAIL or BSAI cylinder instead, as the SAIJ adjuster is not a locking mechanism.
For a precise ISO 15552 replacement, match the 100 mm bore, 170 mm stroke, 10 mm adjustment, PT tapered port threads, and the appropriate mounting accessory. Because the stroke is under 300 mm, side-load stress is minimal, but always verify rod alignment to maximize seal life and leverage the 36 mm cushion length.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 801 kgf.
The rear adjusting screw acts as a mechanical stop that lets you shorten the effective travel from the nominal 170 mm down to 160 mm. This creates a 160-170 mm adjustable window for fine-tuning the retract end position without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.