
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X170-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 170mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X170-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 170 mm stroke that can be dialed back by up to 100 mm, yielding a 70-170 mm usable travel window for precise end-position tuning at commissioning.
This model uses a standard carbon steel rod and PT tapered port threads. The rear adjuster acts purely as a mechanical stop to set deceleration and travel limits, meaning it does not hold the load without live air pressure. For position holding, an external rod lock or related types like SAIL or BSAI are required. The extruded aluminum barrel includes sensor grooves on both sides, ready for CMSE reed or DMSE electronic switches if a magnet is specified later.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X170-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 70-170 mm travel window during product line changeovers to set new end positions rapidly without adding external mechanical stops.
Use the 100 mm adjustment range to accommodate multiple part sizes on a single conveyor line, trimming the stroke back as needed for each run.
Choose this 100 mm bore adjustable cylinder when your machine setup requires variable end stops or frequent product-size changeovers without swapping out the entire actuator. The SAIJ series supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets. Because the total travel here is under 300 mm, side-load risks are manageable, but long unsupported loads should still use an external guide. To match this ISO 15552 replacement, verify the 100 mm bore, 170 mm stroke, 100 mm adjustment, G1/2 port, and PT thread type.
Quick checklist
At 0.7 MPa, the push force increases to 5497 N.
The rear adjuster screw lets you trim the 170 mm nominal stroke back by up to 100 mm, creating a 70-170 mm usable travel window. It functions as a stop to set end positions and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.