
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X170-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 170mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X170-20 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 150-170 mm usable travel window, allowing you to dial back the nominal 170 mm stroke by up to 20 mm during commissioning without swapping the barrel.
This model uses a PT tapered G1/2 port and relies on variable air cushions at both ends to decelerate the payload. The rear adjuster acts purely as a travel stop, meaning it sets the end position but does not hold the load without live air pressure. For position holding, an external rod lock or related SAIL cylinder is required. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic switches.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X170-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 150-170 mm stroke window during product size changes without physically replacing the cylinder or adding external shims.
Leverage the 100 mm bore thrust for pressing operations while adjusting the travel limit to accommodate varying workpiece thicknesses.
The adjustable 20 mm window is ideal for fine-tuning end positions on product changeovers, avoiding the need to bolt on external stops or buy a fixed-stroke SAI cylinder. When matching an ISO 15552 replacement, verify the 170 mm stroke, 20 mm adjustment, PT G1/2 port, and mounting style.
Since the 170 mm stroke is under the 300 mm side-load threshold, the 25 mm rod handles standard loads well, though long unsupported strokes still need an external guide. SAIJ supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. The rear stopper and air cushions decelerate the travel but do not function as a brake.
Quick checklist
The rear adjuster screw lets you shorten the nominal 170 mm stroke by up to 20 mm, providing a usable travel window of 150-170 mm. It acts as a mechanical stop and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.