
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X170-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 170mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
By turning the external stopper screw, you can dial back the nominal 170mm travel by up to 30mm, creating a precise 140-170mm usable window for exact end-position tuning at commissioning. This built-in adjuster acts solely as a travel stop to set deceleration and does not hold the load without live air pressure.
The extruded aluminum barrel features sensor grooves on both sides for CMSE reed or DMSE electronic switches if a magnet is added later. With a 25mm carbon steel rod and M20x1.5 thread, this 100mm bore unit handles high side loads well, and its mounting options cover Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X170-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 140-170mm end position during commissioning without machining new stopper blocks or changing the cylinder.
Quickly adjust the retract stop by up to 30mm on a packaging line when switching to a different product size.
If you need less force, stepping down to an 80mm bore yields 2513N, while moving up to 125mm provides 6136N. The 30mm adjustment range is ideal for product changeovers, letting you shift the end-stop without swapping the cylinder or adding external stops.
For ISO 15552 replacements, match the 100mm bore, 170mm stroke, 30mm adjustment, PT tapered ports, and the specified mounting. Since the stroke is under 300mm, side-load concerns are minimal, but long unsupported loads should still use an external guide. Remember that neither the rear adjuster nor the air cushions function as a lock; for position holding without live air, consider SAIL or BSAI models.
Quick checklist
At the maximum 1.0 MPa, it delivers up to 801 kgf.
The rear adjuster screw lets you shorten the 170mm nominal stroke by up to 30mm, creating a 140-170mm usable travel window. It acts as a mechanical stop to tune end positions and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.