
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X170-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 170mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X170-40-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The integrated -S magnet enables precise position detection using AirTAC CMSE reed or DMSE electronic solid-state sensors housed within the dual-side extruded aluminum barrel grooves.
This model features a 170mm nominal stroke that can be fine-tuned down by up to 40mm, providing an exact usable travel window of 130 to 170mm. This built-in adjustability allows operators to dial in end positions during commissioning or product changeovers without swapping out the entire actuator. It utilizes a PT tapered port thread and a durable carbon steel rod to withstand demanding industrial environments.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X170-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly reconfigure the 130-170mm travel window on packaging lines when switching to different carton or pallet sizes without changing the cylinder.
Fine-tune the exact end-of-stroke position during initial commissioning to dial in precise mechanical stops for heavy pressing operations.
Utilize the rear screw to set variable retraction points in automated assembly equipment, preventing the need for external stopper blocks.
If your setup demands less force, stepping down to an 80mm bore yields 2513N at 0.5 MPa, whereas moving up to a 125mm bore provides 6136N. The adjustable stroke is specifically beneficial for machines processing multiple product sizes, as it replaces the need to maintain an inventory of fixed-stroke SAI cylinders for every format change. When ordering, confirm the 170mm stroke, 40mm adjustment, PT port, and -S magnet to ensure a direct ISO 15552 mounting-interface replacement.
Because the stroke is 170mm, maintaining alignment is critical to prevent premature seal wear; ensure the M20x1.5 rod thread is coupled correctly and use an external guide for any heavy offset loads. Remember that the rear adjuster acts solely as a travel stop and does not hold the load without live air. For applications requiring true load-holding in the event of air pressure loss, consider the SAIL pneumatic lock or BSAI clamp-lock cylinder series instead of relying on the standard air cushion.
Quick checklist
It features a rear adjusting screw that allows you to shorten the effective stroke by up to 40mm. This creates a usable travel window of 130 to 170mm, which can be modified at any time without removing the cylinder from the machine.
At 0.7 MPa, the push force increases to 5497N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.