
The AirTAC SAIJ100 Adjustable Cylinder SAIJ100X170-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 170mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ100X170-75 is a double-acting, double-rod ISO 15552 profile cylinder featuring an integrated rear stroke adjuster. It provides a nominal 170 mm stroke that can be dialed back by up to 75 mm, creating a highly flexible 95 to 170 mm usable travel window.
This adjustable model uses a PT tapered port (G1/2) and a robust 25 mm carbon steel rod with an M20x1.5 thread, offering excellent resistance to side loads. The extruded aluminum barrel includes dual sensor grooves for mounting AirTAC CMSE reed or DMSE electronic switches. It shares the exact mounting dimensions of standard ISO 15552 cylinders, utilizing a reduced SAIJ accessory set of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100X170-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance between 95 and 170 mm during machine setup to accommodate varying material thicknesses without swapping out the entire actuator.
Quickly adjust the physical stroke end-stop on a packaging line diverter to handle different carton sizes, relying on the 25 mm carbon steel rod for durability.
If you need less force, stepping down to an 80 mm bore yields 3518 N at 0.7 MPa. Choose the SAIJ adjustable-stroke design over a fixed SAI cylinder when you need a variable end-stop without adding external physical stops.
When matching an ISO 15552 replacement, verify the 100 mm bore, 170 mm stroke, 75 mm adjustment range, G1/2 PT port, and the appropriate mounting accessory. Note that the rear adjuster acts solely as a travel stop and does not hold the load without live air pressure; for true load-holding, consider an external rod lock, a pilot-operated check valve, or AirTAC SAIL and BSAI clamp-lock cylinders.
Quick checklist
It features a rear adjusting screw that acts as a mechanical stop, allowing you to shorten the effective stroke by up to 75 mm. This creates a usable travel window of 95 to 170 mm, enabling fine end-position tuning at commissioning without changing the cylinder.
At the maximum operating pressure of 1.0 MPa, it delivers up to 801 kgf of push force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.